No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add clone secondary_lun

add clone secondary_lun


The add clone secondary_lun command is used to add secondary logical unit numbers (LUNs) for a clone task. After a clone task has been successfully created, you must add a secondary LUN to compose a clone pair with the primary LUN by running this command.


add clone secondary_lun clone_id=? lun_id=? { initial_synchronization=? | synchronization_rate=? | recovery_policy=? } *





clone_id=? ID of a clone task.

To obtain the value, run "show clone general".

lun_id=? ID of a secondary LUN that you want to add.

To obtain the value, run "show lun general".

initial_synchronization=? Whether or not to implement initial synchronization for a newly added secondary LUN.

The value can be:

  • "yes": Initial synchronization will be performed.
  • "no": Initial synchronization will not be performed.
The default value is "yes".
synchronization_rate=? A synchronization rate.

The value can be

  • "Low": indicates the low rate.
  • "Middle": indicates the medium rate.
  • "High": indicates the high rate.
  • "Highest": indicates the highest rate.
The default value is "Middle".
recovery_policy=? A recovery policy.

The value can be:

  • "manual": indicates manual recovery.
  • "automatic": indicates automatic recovery.
The default value is "automatic".



Usage Guidelines

  • To add a secondary LUN for a clone task, run "add clone secondary_lun clone_id=? lun_id=?".
  • To add a secondary LUN and configure whether to implement initial synchronization and a synchronization rate and a recovery policy for the LUN, run "add clone secondary_lun clone_id=? lun_id=? initial_synchronization=? synchronization_rate=? recovery_policy=?".


To add secondary LUN "14" to clone task "0", run the following command:

admin:/>add clone secondary_lun clone_id=0 lun_id=14
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 363906

Downloads: 237

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next