No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hypervault_copy restore

change hypervault_copy restore


The restore hypervault_copy general command is used to restore a copy to the primary file system.


change hypervault_copy restore copy_id=?





copy_id=? ID of the HyperVault copy.

To obtain the value, run the "show hypervault_copy general hypervault_id=?" command.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


Restore copy "556653223" to primary filesystem.

admin:/>change hypervault_copy restore copy_id=556653223 
DANGER: You are about to recover the data in a copy to the primary file system.
If this operation is performed on the primary file system, data in the file system is recovered to the data in the copy of the primary file system. The copies that are created after this copy will be deleted.
If this operation is performed on the secondary file system, data in the primary file system is recovered to the data in the copy of the secondary file system. The data recovery time depends on the data amount in the copies.
Suggestion: Before performing this operation, back up the data in the primary file system first and ensure that you have selected the correct copy. Besides, ensure that the primary file system is not being read or written. 
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 319733

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next