No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show cli configuration

show cli configuration

Function

The show cli configuration command is used to query existing command line interface (CLI) settings.

Format

show cli configuration

Parameters

None

Level

Guest

Usage Guidelines

None.

Example

To query existing CLI settings, run the following command.

admin:/>show cli configuration
 
  More enabled(display page by page) : Yes
  Silent enabled                     : No
  Capacity Mode                      : Automatic
  Timeout                            : 100 min

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 242150

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next