No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove logical_port ipv6_route

remove logical_port ipv6_route


The remove logical_port ipv6_route command is used to remove the IPv6 route of a logical port.


remove logical_port ipv6_route logical_port_name=? ipv6_address=?





logical_port_name=? Logical port name.

To obtain the value, run the "show logical_port route" command. The value contains 1 to 31 characters, including letters, digits, periods (.), underscores (_), and hyphens (-).

ipv6_address=? IPv6 address of the logical port.

To obtain the value, run the "show logical_port route" command. The value must be an IPv6 address.



Usage Guidelines

  • Before running this command, check that there is an IPv6 route on this logical port.
  • OceanStor 2200 V3 storage system do not support this command.


To remove the IPv6 route from a logical port, run the following command.

admin:/>remove logical_port ipv6_route logical_port_name=lif1 ipv6_address=2011::
DANGER: You are about to remove the route of the logical port.
This operation will interrupt the connection between the storage system and host.
Suggestion: Before you perform this operation, ensure that you have stopped the business on the route.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 315901

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next