No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add smartqos_policy file_system

add smartqos_policy file_system


The add smartqos_policy file_system command is used to add logical unit numbers (file systems) to a SmartQoS policy.


add smartqos_policy file_system smartqos_policy_id=? file_system_id_list=?





smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy".

file_system_id_list=? IDs of the file systems that you want to add.

To obtain the value, run "show file_system general".

You can specify multiple file system IDs separated by commas(,), or ID range separated by hyphens(-), such as: 0,5-8.

A maximum of 64 objects are allowed.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


To add file systems "3", "4", and "5" to SmartQoS policy "0", run the following command:

admin:/>add smartqos_policy file_system smartqos_policy_id=0 file_system_id_list=3,4,5
CAUTION: You are about to add file system into traffic control policy.
This operation may affect file system performance.
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and file system are selected.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365359

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next