No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show failover_group count

show failover_group count

Function

The show failover_group count command is used to display the number of failover groups on the storage system.

Format

show failover_group count

Parameters

None

Level

Guest

Usage Guidelines

  • OceanStor 2200 V3 storage system do not support this command.

Example

To show the number of failover groups, run the following command:

admin:/>show failover_group count
Failover Group Number : 9

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Failover Group Number

Indicates the number of failover groups.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 242219

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next