No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove lun_group lun

remove lun_group lun


remove lun_group lun command is used to remove LUNs from a specified LUN group.


remove lun_group lun lun_group_id=? lun_id_list=?





lun_id_list=? ID list of LUNs or snapshots.

To obtain the value, run "show lun_group lun" or "show lun_group snapshot" . If multiple LUNs or snapshots need to be removed from a LUN group:

  • Separate the LUN or snapshot IDs with commas (,). For example, lun_id_list=1,2,3,4,5.
  • Specify LUN or snapshot ID ranges and separate the ranges with hyphens (-). For example, lun_id_list=1-5,7,9-11.
lun_group_id=? LUN group ID.

To obtain the value, run "show lun_group general".



Usage Guidelines



Remove LUN "2" from LUN group "2".

admin:/>remove lun_group lun lun_group_id=2 lun_id_list=2
WARNING: You are about to remove the selected LUNs from its LUN group. This operation will prevent the hosts associated with the LUN group from accessing the removed LUNs.
Suggestion: Before performing this operation, ensure that the selected LUNs and LUN group are correct, and stop host services running on the LUNs to be removed.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Remove LUN 2 from LUN group successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 314781

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next