No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_format_process

show lun_format_process


The show lun_format_process command is used to query the initialization progress of a thick LUN, including completion percentage and remaining time.


show lun_format_process lun_id=?





lun_id=? ID of a LUN that you want to query.

To obtain the value, run "show lun general".



Usage Guidelines

  • After a LUN is created, the storage system will initialize the LUN. This command can be used to query initialization progress of a thick LUN.
  • This command can not be used to query the initialization progress of a thin LUN.


To query the initialization progress of thick LUN "10", run the following command:

admin:/>show lun_format_process lun_id=10
  LUN ID       : 10 
  Task Process : 65% 
  Remain Time  : 60s

System Response

The following table describes the parameter meanings.



Task Process

Initialization progress

Remain Time

Remaining initialization time

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 369638

Downloads: 245

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next