No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change host_auto_scan

change host_auto_scan

Function

The change host_auto_scan command is used to enable or disable the automatic scan function of a host.

Format

change host_auto_scan switch=?

Parameters

Parameter

Description

Value

switch=? Indicates to enable or disable the automatic scan function.

The value can be "on" or "off", where

  • "on": to enable the function.
  • "off": to disable the function.

Level

Administrator

Usage Guidelines

None

Example

  • To enable the automatic scan function, run the following command:

    admin:/>change host_auto_scan switch=on
    Command executed successfully.
  • To disable the automatic scan function, run the following command.

    admin:/>change host_auto_scan switch=off
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 235867

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next