No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ib_initiator general

show ib_initiator general

Function

The show ib_initiator general command is used to check the properties of an IB initiator.

Format

show ib_initiator general [ wwn=? ] [ is_free=? ] [ host_id=? ]

Parameters

Parameter

Description

Value

wwn=? Initiator WWN.

To obtain the value, run the "show ib_initiator general" command.

host_id=? Host ID.

To obtain the value, run the "show host general" command.

is_free=? Whether the initiator is free.

The value can be "yes" or "no", where:

  • yes: The initiator is free and can be added to a host.
  • no: The initiator is being used and cannot be added to other hosts.

Level

Guest

Usage Guidelines

You can choose only one of the following three parameters: "wwn", "is_free", and "host_id".

Example

To check the properties of an IB initiator, run the following command.

admin:/>show ib_initiator general
 
  WWN               Name  Health Status  Running Status  Is Free  Multi Path Type    
  ----------------  ----  -------------  --------------  -------  ---------------  
  000000000000000d  21    Normal         Online          No       Default                               
  0000000000005678  new   Normal         Offline         Yes      Default          

System Response

The following table describes the parameter meanings.

Parameter

Meaning

WWN

Initiator WWN.

Name

Initiator name.

Health Status

Initiator health status.

Running Status

Initiator running status.

Is Free

Whether the initiator is free.

Multi Path Type

Type of the initiator's multipath.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317492

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next