No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change quorum_server general

change quorum_server general

Function

The change quorum_server general command is used to change the information about a third-place quorum server.

Format

change quorum_server general server_id=? { [ active_ip=? ] [ active_server_port=? ] | [ standby_ip=? ] [ standby_server_port=? ] | [ server_name=? ] | [ description=? ] } *

Parameters

Parameter

Description

Value

server_id=? ID of the quorum server.

Run the "show quorum_server" command obtain the value.

active_ip=? Active Ip address of the quorum server.

Active Ip address of the quorum server.

active_server_port=? Active port of the quorum server.

The value is an integer ranging from 1 to 65535.

standby_ip=? Standby Ip address of the quorum server.

Standby Ip address of the quorum server.

standby_server_port=? Standby port of the quorum server.

The value is an integer ranging from 1 to 65535.

server_name=? Local server name.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), the first character must be a letter or number.

description=? Local description of a server.

Description string using alphanumeric, underscores(_),

dots(.) or hyphens(-)(length is from 1 to 127).

Level

Administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

  • Change an active IP address of the quorum server 1, run the following command.

    admin:/>change quorum_server general server_id=1 active_ip=192.168.2.201
    CAUTION: You are about to modify the configuration of the quorum server.
    If you enter an incorrect IP address or port ID, the quorum server will not work.
    Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent service exceptions.
    Do you wish to continue?(y/n)y
    Command executed successfully.
  • Change an standby IP address of the quorum server 1, run the following command.

    admin:/>change quorum_server general server_id=1 standby_ip=192.168.2.202
    CAUTION: You are about to modify the configuration of the quorum server.If you enter an incorrect IP address or port ID, the quorum server will not work.
    Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent service exceptions.
    Do you wish to continue?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 318407

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next