No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show bond_port

show bond_port


The show bond_port command is used to query bonded ports.


show bond_port [ bond_port_id=? ]

show bond_port [ failover_group_id=? ]





bond_port_id=? ID of the bonded port.

To obtain the value, run "show bond_port" without parameter. The value contains 1 to 63 characters comprised of digits.

failover_group_id=? ID of the failover group.This parameter does not support 2200 V3 storage systems.

The value is an integer between 0 and 8191.



Usage Guidelines

  • To query all bonded ports, run "show bond_port".
  • To query a specific bonded port, run "show bond_port bond_port_id=?".
  • To query bonded ports in a specified failover group, run "show bond_port failover_group_id=?".

bond_port_id and failover_group_id are mutually exclusive.


  • To query all bonded ports, run the following command.

    admin:/>show bond_port
    ID Name Port ID List HealthStatus RunningStatus MTU
    -- ------- --------------- --------------- --------------- ---------------
    0 newbond ENG0.B1.P0,ENG0.B1.P1 Normal LinkUp 2000
    1 newbond2 ENG0.A1.P0,ENG0.A1.P1 Normal LinkUp 2000
  • To query the bonded ports in failover group 0, run the following command.

    admin:/>show bond_port failover_group_id=0
    ID Name Port ID List HealthStatus RunningStatus MTU
    -- ------- --------------- --------------- --------------- ---------------
    549772730113 test ENG0.B3.P0,ENG0.B3.P3 Normal Link up 3000

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 318671

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next