No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create cache_partition

create cache_partition


The create cache_partition command is used to create a cache partition.


create cache_partition name=? storage_engine_id=? expect_read_size=? expect_write_size=?





name=? Cache partition name.

The value contains 1 to 31 characters including digits, letters, hyphens (-), underscores (_), and periods (.).

storage_engine_id=? ID of an engine where a cache partition resides.

To obtain the value, run "show storage_engine".

expect_read_size=? Desired cache read capacity.

The value is an integer multiple of 128, ranging from 256 to 67,108,864, expressed in MB.

expect_write_size=? Desired cache write capacity.

The value is an integer multiple of 128, ranging from 256 to 67,108,864, expressed in MB.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


Create cache partition "Cache_001" on engine "0" and set the desired cache read and write capacities to "512MB" and "512MB" respectively. The ID and output vary depending on a specific product.

admin:/>create cache_partition name=Cache_001 storage_engine_id=0 expect_read_size=512 expect_write_size=512
CAUTION: You are about to create SmartPartition. 
This operation may affect the performance of LUN or file system. 
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the SmartPartition is correctly configured.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 363865

Downloads: 237

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next