No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_consistency_group pair

show hyper_metro_consistency_group pair

Function

The show hyper_metro_consistency_group pair command is used to query the pairs in a HyperMetro consistency group.

Format

show hyper_metro_consistency_group pair consistency_group_id=?

Parameters

Parameter

Description

Value

consistency_group_id=? ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.

Level

Guest

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

To query the pairs in HyperMetro consistency group 1, run the following command.

admin:/>show hyper_metro_consistency_group pair consistency_group_id=1   
 
ID  Health   Running    Type    Role
    Status   Status
 
--  ------   -------    -----   ------
 
 
1   Normal   Normal     LUN     Preferred
 
 
2   Normal   Normal     LUN     Preferred
 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of the HyperMetro pair.

Health Status

Health status of a pair: NORMAL or FAULT.

Running Status

Running status: Normal, Syncing, To Be Synchronized, Pause, Forced Start or Invalid.

Type

Resource type: LUN or File System.

Role

Whether the end is Preferred end or Non-preferred end.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 241778

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next