No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create quota file_system

create quota file_system

Function

The create quota file_system command is used to create the default directory quota for a file system.

Format

create quota file_system file_system_id=? quota_type=? { space_hard_quota=? | space_soft_quota=? | file_hard_quota=? | file_soft_quota=? } *

Parameters

Parameter

Description

Value

file_system_id=? Indicates the file system ID.

To obtain the value, run the "show file_system general" command.

quota_type=? Indicates the quota type.

The value must be "directory".

space_hard_quota=? Indicates the hard quota of space.

The value must be greater than the space soft quota, and smaller than or equal to 16,384 TB.

space_soft_quota=? Indicates the soft quota of space.

The value must be smaller than the hard space quota. If the hard space quota is not specified, the value must be smaller than or equal to 16,384 TB.

file_hard_quota=? Indicates the hard quota of file quantity, expressed in thousand(K).

The value must be greater than the soft quota of file quantity, and smaller than or equal to 2,000,000K.

file_soft_quota=? Indicates the soft quota of file quantity, expressed in thousand(K).

The value must be smaller than the hard quota of file quantity. If the hard quota of file quantity is not specified, the value must be smaller than or equal to 2,000,000K.

Level

Administrator

Usage Guidelines

  • The quota_type must be "directory".If this command executed, default directory quota of the file system will be created.
  • This command does not support OceanStor 2200 V3 storage system.

Example

To create defaul directory quota for the file system 1, the quota type is set to directory, and the space hard quota is configured with 1 GB, run the following command.

admin:/>create quota file_system file_system_id=1 quota_type=directory space_hard_quota=1GB
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 235032

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next