No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add smart_cache_pool disk

add smart_cache_pool disk

Function

The add smart_cache_pool disk command is used to add a disk to a SmartCache pool.

Format

add smart_cache_pool disk smart_cache_pool_id=? disk_list=?

Parameters

Parameter

Description

Value

smart_cache_pool_id=? Pool ID of SmartCache.

To obtain the value, run "show smart_cache_pool general".

disk_list=? Disk ID list.

To obtain the value, run "show disk general".

Level

Administrator

Usage Guidelines

None

Example

To add disk DAE000.7 to SmartCache storage pool 0, run the following command:

admin:/>add smart_cache_pool disk smart_cache_pool_id=0 disk_list=DAE000.7

Add the disk DAE000.7 to smart_cache_pool successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 241570

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next