No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change bond_port general

change bond_port general

Function

The change bond_port general command is change the MTU value of a bonded port.

Format

change bond_port general bond_port_id=? mtu=?

Parameters

Parameter

Description

Value

bond_port_id=? ID of the bonded port.

To obtain the value, run "show bond_port".

mtu=? MTU of the bonded port.

The value is an integer between 1280 and 9000.

Level

Administrator

Usage Guidelines

  • Run "show bond_port" to query all bonded ports.
  • Run "change bond_port general bond_port_id=? mtu=?" to change the MTU of a specific bonded port.

Example

To change the MTU value of port 139009, run the following command.

admin:/>change bond_port general bond_port_id=139009 mtu=4000
DANGER: You are about to modify the MTU settings for the bond port. This operation may interrupt services or cause service exceptions.
Suggestion: Before performing this operation, ensure that the modification is necessary.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 259584

Downloads: 176

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next