No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_consistency_group

delete hyper_metro_consistency_group


The delete hyper_metro_consistency_group command is used to delete a HyperMetro consistency group.


delete hyper_metro_consistency_group consistency_group_id=? [ is_local_delete=? ]





consistency_group_id=? ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.

is_local_delete=? Whether the consistency group will be deleted from local devices.

The value can be:

  • "yes": The consistency group will be deleted from local devices.
  • "no": The consistency group will not be deleted from local devices.
The default value is "no".



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


To delete the HyperMetro consistency group whose ID is 1, run the following command.

admin:/>delete hyper_metro_consistency_group consistency_group_id=1
WARNING: You are about to delete the HyperMetro consistency group. Once it is deleted, you cannot restore its configuration. You must reconstruct a new one. 
If the consistency group is deleted locally, perform the operation on both storage arrays. Otherwise, residual configuration of the consistency group exists. 
Suggestion: Before performing this operation, ensure that the parameters are correct to prevent service exceptions.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 369685

Downloads: 245

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next