No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show worm_file check_digest

show worm_file check_digest

Function

The show worm_file check_digest command is used to verify the signature of a WORM file.

Format

show worm_file check_digest file_system_id=? file_path=?

Parameters

Parameter

Description

Value

file_system_id=? File system ID.

To obtain the value, run the "show file_system general" command without parameters. The value is an integer between 0 and 65535.

file_path=? Full path of the WORM file.

You can obtain the value from the client.

Level

Guest

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.

Example

Verify the signature of a WORM file that is protected.

admin:/>show worm_file check_digest file_system_id=1 file_path=file
The file fingerprint is verified successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 318644

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next