No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change performance restore

change performance restore

Function

The change performance restore command is used to configure the policies for dumping the performance statistics of the storage system.

Format

change performance restore enabled=? ip=? path=? user=? password=? [ protocol=? ]

Parameters

Parameter

Description

Value

enabled=? Switch of the dumping function for the performance statistics of the storage system.

The value can be "yes" or "no", where:

  • "yes": The dumping for system performance statistics will be enabled.
  • "no": The dumping for system performance statistics will be disabled.
The default value is "no".
ip=? IP address of a File Transfer Protocol (FTP) server or a Secure File Transfer Protocol (SFTP) server to which system performance statistics will be dumped.

None.

path=? A path under which system performance statistics will be stored.

The value contains 1 to 255 characters. The file save path cannot contain special characters including ':?"<>|* or start with a period (.) or space. The first character after the delimiter (/ or \) cannot be a period (.).

user=? User name of an FTP server or a SFTP server.

The value contains 1 to 63 characters.

password=? Password for logging in to an FTP server or a SFTP server.

The value contains 1 to 63 characters.

protocol=? Protocol type.

The value can be "FTP" or "SFTP". The default value is "SFTP".

To ensure the security of data transfer, you are advised to use Secure File Transfer Protocol (SFTP).

Level

Administrator

Usage Guidelines

  • To configure the switch of the system performance statistics dumping function, the IP address of the FTP server or SFTP server to which performance statistics will be exported, the path to the performance statistics, and the user name and password for logging in to the FTP server or SFTP server, run "change performance restore enabled=? ip=? path=? user=? password=?".
  • If the storage system serves as a server in the file transfer with external systems, it supports the SFTP service only. If the storage system serves as a client, it supports both the FTP and SFTP services.

Example

To modify the system performance statistics dumping function, where the new IP address of the SFTP server for storing dumped statistics is 192.168.8.211, the name of the folder for storing those statistics is home, and the user name and password for logging in to the SFTP server are "admin" and "123456" respectively, run the following command.

admin:/>change performance restore enabled=yes ip=192.168.8.211 path=home user=admin password=******
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236742

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next