No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk format

show disk format

Function

The show disk format command is used to check the disk formatting progress.

Format

show disk format disk_id=?

Parameters

Parameter

Description

Value

disk_id=? ID of the hard disk.

To obtain the value, run "show disk general".

Level

Guest

Usage Guidelines

None

Example

To check the disk formatting progress, run the following command. The command output varies depending on a specific product.

admin:/>show disk format disk_id=DAE001.11
Format Progress(%) : 100 
Format Remain Time : 0 hour(s),0 minute(s),0 second(s)

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Format Progress

Indicates the disk formatting progress.

Format Remain Time

Indicates the time remaining of disk formatting.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316576

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next