No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show notification trap

show notification trap

Function

The show notification trap command is used to query the settings of the trap server.

Format

show notification trap [ server_id=? ]

Parameters

Parameter

Description

Value

server_id=? ID of the trap server.

To obtain the value, run "show notification trap" without parameters. The value can be an integer between 0 and 3.

Level

Guest

Usage Guidelines

  • To query the settings of all trap servers, run "show notification trap".
  • To query the settings of a specific trap server, run "show notification trap [ server_id=? ]".

Example

  • To query the settings of all trap servers, run the following command.

    admin:/>show notification trap
    Server ID Server IP Server Port Trap Version Trap Type USM User Name 
    --------- ------------ ----------- ------------ --------- -------------
    0         192.168.10.7 168         v3           Original  Kaimse 
    1         192.168.9.65 162         v1           All       --
    2         192.168.9.04 162         v2c          Parsed    --
    3         192.168.19.5 162         v3           All       user
  • To query the settings of the trap server whose ID is "0", run the following command.

    admin:/>show notification trap server_id=0
    Server ID Server IP Server Port Trap Version Trap Type USM User Name 
    --------- ------------ ----------- ------------ --------- -------------
    0         192.168.10.7 168         v3           Original  Kaimse

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 258913

Downloads: 176

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next