No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show user

show user

Function

The show user command is used to query basic information about users.

Format

show user [ user_name=? ]

Parameters

Parameter

Description

Value

user_name=? User name.

To obtain the value, run "show user" without parameters.

Level

Guest

Usage Guidelines

  • The super administrator can query all users' basic information, whereas an administrator or read-only user can query only their own basic information.
  • To query the basic information about existing users, run "show user".
  • To query the basic information about a specific user, run "show user user_name=?".

Example

  • Query basic information about all the users.

    admin:/>show user
      Name     Level        Status  Type                     Lock Status  Create Time                    Domain User Group Account Status
      -------  -----------  ------  -----------------------  -----------  -----------------------------  -----------------   --------------
      admin    Super_admin  Online  Local                    Unlocked     2015-04-26/14:26:50 UTC+08:00  --   Normal
      mm_user  Admin        Online  Machine to Machine User  Unlocked     2015-04-26/14:26:50 UTC+08:00  --   Normal
  • Query basic information about user "admin".

    admin:/>show user user_name=admin
      Name   Level        Status  Type   Lock Status  Create Time                    Domain User Group  Account Status
      -----  -----------  ------  -----  -----------  -----------------------------  -----------------   --------------
      admin  Super_admin  Online  Local  Unlocked     2015-04-26/14:26:50 UTC+08:00  --   Normal

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Name

User name.

Level

User level.

Status

Whether the user has logged in.

Type

User type.

Lock Status

Whether the user is locked.

Create Time

When the user was created.

Domain User Group

Domain user group which the user belongs to.

NOTE:
This parameter is currently valid for LDAP users only.

Account Status

User account status.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316522

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next