No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add failover_group vlan_port

add failover_group vlan_port

Function

The add failover_group vlan_port command is used to add VLAN ports to a customized failover group.

Format

add failover_group vlan_port failover_group_id=? vlan_port_list=?

Parameters

Parameter

Description

Value

failover_group_id=? ID of a failover group.
  • The value is an integer between 1 and 1024.
  • To obtain the value, run the "show failover_group general" command without parameters.
vlan_port_list=? List of VLAN ports.
  • To obtain the value, run the "show vlan general" command.
  • When multiple VLAN ports are entered, separate the port names from each other using commas (,).

Level

Administrator

Usage Guidelines

  • The "failover_group_id" supports only the ID of a customized failover group.
  • The "vlan_port_list" supports one or more VLAN port names.
  • OceanStor 2200 V3 storage system do not support this command.

Example

  • Add a VLAN port to a customized failover group.

    admin:/>add failover_group vlan_port failover_group_id=1 vlan_port_list=vlan1
    Add VLAN port vlan1 to failover group successfully.
  • Add VLAN ports to a customized failover group.

    admin:/>add failover_group vlan_port failover_group_id=1 vlan_port_list=vlan1,vlan2
    Add VLAN port vlan1 to failover group successfully.
    Add VLAN port vlan2 to failover group successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316551

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next