No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change quota quota_tree

change quota quota_tree

Function

The change quota quota_tree command is used to change directory quota of a specified quota tree.

Format

change quota quota_tree quota_tree_id=? quota_type=? { space_hard_quota=? | space_soft_quota=? | file_hard_quota=? | file_soft_quota=? } *

Parameters

Parameter

Description

Value

quota_tree_id=? Indicates the quotatreeID. Format: filesystemID@quotatreeID. filesystemID ranges between 0 and 65535, and quotatreeID ranges between 0 and 4096.

To obtain the value, run the "show quota_tree general" command.

quota_type=? Indicates the quota type.

The value must be: "directory".

space_hard_quota=? Indicates the hard quota of space.

The value must be greater than the space soft quota, and smaller than or equal to 16,384 TB.

space_soft_quota=? Indicates the soft quota of space.

The value must be smaller than the hard space quota. If the hard space quota is not specified, the value must be smaller than or equal to 16,384 TB.

file_hard_quota=? Indicates the hard quota of file quantity, expressed in thousand(K).

The value must be greater than the soft quota of file quantity, and smaller than or equal to 2,000,000K.

file_soft_quota=? Indicates the soft quota of file quantity, expressed in thousand(K).

The value must be smaller than the hard quota of file quantity. If the hard quota of file quantity is not specified, the value must be smaller than or equal to 2,000,000K.

Level

Administrator

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.

Example

To change the hard space quota and soft file quota of the quota tree 0@1 to 1 GB and 100 thousand respectively, run the following command.

admin:/>change quota quota_tree quota_tree_id=0@1 quota_type=directory space_hard_quota=1GB file_soft_quota=100K
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 314798

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next