No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change share_permission ftp

change share_permission ftp


The change share_permission ftp command is used to change FTP share permission.


change share_permission ftp user_id=? { access_name=? | share_path=? | file_system_id=? | permission=? | up_bandwidth=? | down_bandwidth=? } *





user_id=? The ID of user.

The value ranges from 0 to 900,000.

access_name=? The name of user.

The value must start with a letter and contain 1 to 32 ASCII characters ,must not end with letter dot( .) ,excluding the following letters"/\[]<>+:;,?*|=@.

share_path=? The share path of ftp.

The value contains 1 to 1023 ASCII characters.

file_system_id=? The ID of file system.

The value ranges from 0 to 65535.

permission=? Permission expressed in 5-bit binaries. Such permissions are permissions to create directories, browse directories and files, and upload, download and delete files and directories.

The value ranges from 0 to 31.

up_bandwidth=? The bandwidth of upload.

The value ranges from 0 to 102400.

down_bandwidth=? The bandwidth of download.

The value ranges from 0 to 102400.



Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.


  • To change FTP share permission, run the following command:

    admin:/>change share_permission ftp user_id=100001 access_name=ftpuser share_path=/fs0/ftp file_system_id=0 permission=0 up_bandwidth=10 down_bandwidth=10
    Command executed successfully.
  • To show FTP share permission, run the following command:

    admin:/>show share_permission ftp user_id=100001
    User ID : 100001
    Access Name : ftpuser
    Share Path : /fs0/ftp
    Up Bandwidth : 10
    Down Bandwidth : 10
    File System ID : 0
    Permission : None

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 364602

Downloads: 238

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next