No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create lun_group

create lun_group

Function

create lun_group command is used to create a LUN group.

Format

create lun_group name=? [ lun_group_id=? ] [ lun_id_list=? ]

Parameters

Parameter

Description

Value

name=? LUN group name.

The value contains 1 to 31 digits, letters, underscores (_), hyphens (-), and periods (.).

lun_group_id=? LUN group ID.

The value is an integer ranging from 0 to 8191.

If you do not specify this parameter, the system automatically allocates an ID for a new LUN group.

lun_id_list=? LUN ID list. When this parameter is specified, LUNs corresponding to the IDs will be added to a LUN group.

To obtain the value, run "show lun general".

When multiple LUNs need to be added to a LUN group, separate these LUN IDs with commas (,), or separate LUN ID range with hyphens(-), such as: 0,5-8.

Level

Administrator

Usage Guidelines

A LUN group can be added with a maximum of 4096 LUNs and a LUN can be added to a maximum of 8 LUN groups.

Example

Create LUN group "LUNGroupTest" and add LUNs "0", "1", and "2" to this group.

admin:/>create lun_group name=LUNGroupTest lun_id_list=0,1,2
Create LUN group successfully.
Add LUN 0 to LUN group successfully.
Add LUN 1 to LUN group successfully.
Add LUN 2 to LUN group successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 242128

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next