No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create quorum_server general

create quorum_server general

Function

The create quorum_server general command is used to create a third-place quorum server.

Format

create quorum_server general active_ip=? server_name=? [ active_server_port=? | description=? ] *

Parameters

Parameter

Description

Value

active_ip=? Active IP of the quorum server.

Active IP of the quorum server.

server_name=? Local server name.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), the first character must be a letter or number.

active_server_port=? Server communication port ID.

The value is an integer ranging from 1 to 65535. If this parameter is not specified, the system uses the default port 30002.

description=? Local description of a server.

Description string using alphanumeric, underscores(_),

dots(.) or hyphens(-)(length is from 1 to 127)

Level

Administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

To create a third-place quorum server whose IP address is"10.100.2.210", server name is "cps0", run the following command.

admin:/>create quorum_server general active_ip=10.100.2.210 server_name=cps0
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 261248

Downloads: 176

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next