No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system traversedir

change file_system traversedir

Function

The change file_system traversedir command is used to enable or disable the 32-bit compatible mode of directory traversal for file systems.

Format

change file_system traversedir file_system_id=? traversedir_adapter=?

Parameters

Parameter

Description

Value

file_system_id=? File system ID.

The value is an integer ranging from 0 to 65,535 or "all". "all" indicates all file systems.

traversedir_adapter=? Whether the 32-bit compatible mode of directory traversal is enabled.

The value can be "yes" or "no", where:

  • "no": The 32-bit compatible mode of directory traversal is disabled.
  • "yes": The 32-bit compatible mode of directory traversal is enabled.

Level

Super administrator

Usage Guidelines

  • Before running this command, ensure that the selected file systems are correct.
  • This command does not support OceanStor 2200 V3 storage system.

Example

  • Enable the 32-bit compatible mode of directory traversal for file system "1".

    admin:/>change file_system traversedir fil_system_id=1 traversedir_adapter=yes
    Command executed successfully.
  • Enable the 32-bit compatible mode of directory traversal for all file systems.

    admin:/>change file_system traversedir fil_system_id=all traversedir_adapter=yes
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 318647

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next