No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove hyper_metro_consistency_group pair

remove hyper_metro_consistency_group pair

Function

The remove hyper_metro_consistency_group pair command is used to delete a pair from a HyperMetro consistency group.

Format

remove hyper_metro_consistency_group pair consistency_group_id=? pair_id=?

Parameters

Parameter

Description

Value

consistency_group_id=? ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without any parameters to obtain the value.

pair_id=? ID of the HyperMetro pair.

Run the "show hyper_metro_consistency_group pair" command with consistency group id to obtain the value.

Level

Administrator

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

To delete pair 1 from consistency group 2, run the following command.

admin:/>remove hyper_metro_consistency_group pair consistency_group_id=2 pair_id=1
WARNING: You are about to remove a pair from the HyperMetro consistency group. 
After the pair is removed from the consistency group, the pair will use its own control policies. Its running status is not consistent with that of the consistency group. 
Suggestion: Before performing this operation, ensure that the parameters are correct to prevent service exceptions.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317321

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next