No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ib_port count

show ib_port count


The show ib_port count command is used to calculate the number of IB ports.


show ib_port count [ parent_type=? ] [ logical_type=? ]





parent_type=? Parent type.

The value can be "controller", "expand_board", or "interface_module", where:

  • controller: indicates a controller.
  • expand_board: indicates an expansion board.
  • interface_module: indicates an interface module.
logical_type=? Logical port type.

The value can be "host", "exp", "mngt", "maintenance", "innter", "mngt_srv" , "maintenance_srv", "backup_mgr", "product_storage", "backup_storage", "eth_not_config", or "ip_scale_out", where:

  • host: indicates a host port.
  • exp: indicates an expansion port.
  • mngt: indicates a management network interface.
  • maintenance: indicates a maintenance port.
  • innter: indicates an internal port.
  • mngt_srv: indicates a port that can function as both a management port and a service port.
  • maintenance_srv: indicates a port that can function as both a maintenance port and a service port.
  • backup_mgr: indicates a backup management network interface.
  • product_storage: indicates a production storage network interface.
  • backup_storage: indicates a backup storage network interface.
  • eth_not_config: indicates a network interface for which no roles have been configured.
  • ip_scale_out: indicates a network interface for IP Scale-Out.



Usage Guidelines

Parameters "parent_type" and "logical_type" are mutually exclusive.


To calculate the number of IB ports, run the following command:

admin:/>show ib_port count
  IB Port Number : 2

System Response

The following table describes the parameter meanings.



IB Port Number

Number of IB ports.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 314782

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next