No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show homedir general

show homedir general

Function

The show homedir general command is used to show the information of homedir.

Format

show homedir general

Parameters

None

Level

Guest

Usage Guidelines

This command does not support 2200 V3 storage system.

Example

To show the information of homedir, run the following command:

admin:/>show homedir general
  File System ID  Share Path  Is Open  
  --------------  ----------  -------  
  0               /fs0        No 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

File System ID

Indicates the file system ID.

Share Path

Indicates the share path.

Is Open

Whether the homedir is enable.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 319750

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next