No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_domain general

delete hyper_metro_domain general


The delete hyper_metro_domain general command is used to delete a HyperMetro domain.


delete hyper_metro_domain general domain_id=? [ is_local_delete=? ]





domain_id=? ID of the HyperMetro domain.

Run the "show hyper_metro_domain general" command to obtain the value.

is_local_delete=? Whether to delete the domain from the local device.

The value is "yes" or "no", where:

  • "yes": to delete the domain from the local device.
  • "no": not to delete the domain from the local device.
The default value is "no".



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


To delete HyperMetro domain "1", run the following command.

admin:/>delete hyper_metro_domain general domain_id=1
WARNING: You are going to delete a HyperMetro domain.
This operation may result in abnormal status of HyperMetro pairs in the HyperMetro domain.
Suggestion: Before performing this operation, ensure that no service is using the HyperMetro domain to prevent service exceptions.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365935

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next