No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show service cifs

show service cifs

Function

The show service cifs command is used to show information about the CIFS sharing service.

Format

show service cifs

Parameters

None

Level

Guest

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.

Example

To show information about the CIFS sharing service, run the following command.

admin:/>show service cifs
Running Status : Start
Security Model : All Attestation
Guest Enabled : No
Anonymous Enabled : No
Signing Required : No
Signing Enabled : No
Oplock Enabled : Yes
Oplock Timeout(s) : 35
Notify Enabled : Yes
Durable Handle Enabled : Yes 
Durable Handle Timeout(s) : 60
ABSE Enabled : No
SMB1 Enabled : Yes
SMB2 Enabled : Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Running Status

Running status of the CIFS sharing service.

Security Model

Authentication mode. Possible values are local authentication, domain authentication, and local authentication plus domain authentication. The default value is local authentication plus domain authentication.

Guest Enabled

Whether guest access is allowed. The default value is FALSE.

Anonymous Enabled

Whether anonymous access is allowed.

Signing Required

Whether the CIFS client must support signature.

Signing Enabled

Whether to enable signature for the CIFS protocol.

Oplock Enabled

Whether to enable opportunistic locking (after a protocol is locked, the file system does not require a lock).

Oplock Timeout(s)

Timeoout period of opportunistic locking, expressed in seconds.

Notify Enabled

Whether to enable Notify.

Durable Handle Enabled

Whether to enable Durable Handle.

Durable Handle Timeout

Timeout period of durable handle, expressed in seconds.

ABSE Enabled

Whether access based share enumeration is allowed.

SMB1 Enabled

Whether to enable SMB1.

SMB2 Enabled

Whether to enable SMB2.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 264891

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next