No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hypervault general

show hypervault general

Function

The show hypervault general command is used to query HyperVault.

Format

show hypervault general [ hypervault_id=? ]

Parameters

Parameter

Description

Value

hypervault_id=? ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

Level

Guest

Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.

Example

  • To query the basic information on existing hypervault tasks.

    admin:/>show hypervault general
        ID      Health Status    Running Status    Is Primary    Local Resource ID  Remote Device ID  Remote Resource ID   Recover Policy   Backup Rate  Local Resource Capacity    remote Resouce Capacity
    ----------  --------------  ----------------   ------------  -----------------  ---------------    ----------------     ------------    ----------   --------------------  --------------------
    20017929952     normal         split               yes              0                  1                  1               automatic           middle           10.000 GB                10.000 GB
  • To query the detailed information on hypervault task "200799520000".

    admin:/>show hypervault general  hypervault_id=200799520000
    ID:                      200799520000
    Health Status:           normal
    Runnning Status:              split    
    Is Primary:              yes   
    Resource Type:           filesystem
    Local Resource ID:       0
    Local Resource Name:     fs1
    Remote Device ID:        1
    Remote Resource ID:      1
    Remote Resource Name:    fs2
    Recover Policy:         automatic
    Backup Rate:              middle
    Local Resource Capacity: 10.000 GB 
    remote Resource Capacity: 10.000 GB

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Indicates the ID of the hypervault object.

Health Status

The health status of hypervault.

Running Status

The running status of hypervault.

Is Primary

Is the resource primary.

Resource Type

The type of resource.

Local Resource ID

The primary resourc ID of backup object.

Local Resource Name

The primary resourc name of backup object.

Remote Device ID

The remote device ID.

Remote Resource ID

The remote resource ID.

Remote Resource Name

The secondary resource name.

Recover Policy

Error rectifying policy.

Backup Rate

Backup rate.

Local Resource Capacity

The capacity of local resource.

remote Resource Capacity

The Capacity of remote resource.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 315926

Downloads: 206

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next