No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hypervault general

delete hypervault general


The delete hypervault general command is used to delete the HyperVault function.


delete hypervault general hypervault_id=? [ is_local_delete=? ] [ reserve_copy=? ]





hypervault_id=? ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

is_local_delete=? Whether a remote replication task can be locally deleted when the link is down.

The value can be:

  • "yes": The hypervault task can be locally deleted.
  • "no": The hypervault task cannot be locally deleted.
The default value is "no".
reserve_copy=? Copy reserving policy.

The value is "yes" or "no", where:

  • "yes": to reserve copies.
  • "no": to delete copies.
The default value is "yes".



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


To delete hypervault task "9747215445131264", run the following command.

admin:/>delete hypervault general hypervault_id=9747215445131264
DANGER: You are about to delete HyperVault.
This operation deletes the HyperVault function from a file system, including the local backup and remote backup functions of the file system. New data written into the primary file system is not backed up. Data of the file system copies on the secondary file system cannot be recovered in the primary system. The deletion cannot be undone.
Suggestion: Before performing this operation, ensure that you have selected the correct HyperVault object to delete.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365963

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next