No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_consistency_group pause

change hyper_metro_consistency_group pause


The change hyper_metro_consistency_group pause command is used to suspend a HyperMetro consistency group.


change hyper_metro_consistency_group pause consistency_group_id=? [ stop_role=? ]





consistency_group_id=? ID of the consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.

stop_role Site whose services you want to stop (When the running status of a HyperMetro consistency group is "Synchronizing" or "To Be Synchronized", you cannot stop services at the site that uniquely provides host read and write services).

The value can be "Preferred" or "Non-preferred", where:

  • "Preferred": Preferred site.
  • "Non-preferred": Non-preferred site.



Usage Guidelines

OceanStor 2200 V3 storage system do not support this command.


To suspend HyperMetro consistency group 1, run the following command.

admin:/>change hyper_metro_consistency_group pause consistency_group_id=1
CAUTION: You are about to suspend the HyperMetro consistency group. 
Once the HyperMetro consistency group is suspended, real-time mirroring across sites stops and the member LUNs in the HyperMetro consistency groups can only be accessed in one direction. 
Suggestion: Before performing this operation, ensure that the two sites are properly connected to hosts to prevent service exceptions.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 319443

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next