No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create antivirus_server general

create antivirus_server general

Function

The create antivirus_server general command is used to create an antivirus server.

Format

create antivirus_server general name=? ip=? port=? vendor=? logical_port_name_list=?

Parameters

Parameter

Description

Value

name=? Name of the antivirus sever.

The value consists of 1 to 127 ASCII characters including numbers, letters, underscores (_), hyphens (-), and periods (.).

ip=? IP address of the antivirus server.

An IPv4 address consists of four 8-digit unsigned integers, with each integer ranging from 0 to 255. An IPv6 address consists of eight 16-digit unsigned integers, with each integer represented by four hexadecimal numbers.

port=? Port of the antivirus agent on the antivirus server. The default port of the antivirus agent is "26810 ".

The value ranges from "1" to "65,535".

vendor=? Antivirus software.

Possible values are "symantec_protection_engine", "symantec_endpoint_protection", "trendmicro_serverprotect", and "mcafee_virusscan".

logical_port_name_list=? List of available logical ports of the antivirus server.

To obtain the value, run the "show logical_port general" command. Multiple logical ports are separated by commas (,). For example, "lif01,lif02".

Level

Administrator

Usage Guidelines

  • Before running this command, ensure that the system is running correctly.
  • Before running this command, ensure that the antivirus module is running correctly.
  • OceanStor 2200 V3 storage system do not support this command.

Example

Create an antivirus server whose name is "srv1", IP address is "10.187.70.189", port is "26810", antivirus software is "symantec_endpoint_protection", and logical port list is "lif01,lif02".

admin:/>create antivirus_server general name=srv1 ip=10.187.70.189 port=26810 vendor=symantec_endpoint_protection logical_port_name_list=lif01,lif02
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 238603

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next