No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove host initiator

remove host initiator

Function

The remove host initiator command is used to remove initiators from a host.

Format

remove host initiator initiator_type=? { wwn=? | iscsi_iqn_name=? }

Parameters

Parameter

Description

Value

initiator_type=? Type of an initiator that you want to remove.

The value can be "iSCSI" or "FC", where:

  • "iSCSI": indicates Internet Small Computer System Interface (iSCSI) initiators.
  • "FC": indicates Fibre Channel initiators.
iscsi_iqn_name=? The iSCSI qualified name (IQN) of an iSCSI initiator that you want to remove.

To obtain the value, run "show initiator".

wwn=? World Wide Name (WWN) of a Fibre Channel initiator that you want to remove.

To obtain the value, run "show initiator".

Level

Administrator

Usage Guidelines

  • Running this command prevents a host from accessing the storage resources of the storage system.
  • Before running this command, ensure that the selected initiator is exactly the one you want to remove.

Example

  • To remove the iSCSI initiator whose IQN is "iqn.01", run the following command.

    admin:/>remove host initiator initiator_type=iSCSI iscsi_iqn_name=iqn.01
    DANGER: You are about to remove initiator from host. This operation will interrupt related ongoing services.
    Suggestion: Before performing this operation, ensure that the selected host and initiators are correct and stop services on the host.
    Have you read danger alert message carefully?(y/n)y
     
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • To remove the Fibre Channel initiator whose WWN is "455856585f654578", run the following command.

    admin:/>remove host initiator initiator_type=FC wwn=455856585f654578
    DANGER: You are about to remove initiator from host. This operation will interrupt related ongoing services.
    Suggestion: Before performing this operation, ensure that the selected host and initiators are correct and stop services on the host.
    Have you read danger alert message carefully?(y/n)y
     
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 236830

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next