No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add mapping_view port_group

add mapping_view port_group


add mapping_view port_group command is used to add a port group to a mapping view.


add mapping_view port_group mapping_view_id=? port_group_id=?





mapping_view_id=? Mapping view ID.

To obtain the value, run "show mapping_view general".

port_group_id=? Port group ID.

To obtain the value, run "show host_group general".



Usage Guidelines

A port group can be added to a maximum of 64 mapping views.


Add port group "0" to mapping view "1".

admin:/>add mapping_view port_group mapping_view_id=1 port_group_id=0
WARNING: You are about to add the port group to the mapping view. This operation will prevent the hosts in the mapping view from accessing LUNs in the mapping view.
Suggestion: Before performing this operation, ensure that the selected mapping view and port group are correct. If the ports connecting the hosts to the device in the mapping view do not belong to the port group, stop host services running on the LUNs in the mapping view.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Add port group 0 successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 316734

Downloads: 208

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next