No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show mapping_view general

show mapping_view general


The show mapping_view general command is used to query details on mapping views of the storage system.


show mapping_view general [ mapping_view_id=? ]





mapping_view_id=? ID of a mapping view.

To obtain the value, run "show mapping_view general" without parameters.



Usage Guidelines

  • To query details on existing mapping views of the storage system, run show mapping_view general.
  • To query details on a specific mapping view, run show mapping_view general mapping_view_id=?.


To query details on mapping view "1", run the following command.

admin:/>show mapping_view general mapping_view_id=1
  Mapping View ID    : 1
  Mapping View Name   : MappingView001
  Inband Command       : Disable
  LUN Group ID        : 1
  LUN Group Name      : LUNGroup001
  Port Group ID       : 1
  Port Group Name      : PortGroup001
  Host Group ID       : 1
  Host Group Name      : HostGroup001

System Response

The following table describes the parameter meanings.



Inband Command

Whether or not to enable inband commands.

Command Device

Command device.

Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 369652

Downloads: 245

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next