No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove lun_copy other_vendor_target

remove lun_copy other_vendor_target


remove lun_copy other_vendor_target command is used to remove target logical unit numbers (LUNs) from a LUN copy, where the LUNs reside on third-party storage systems.


remove lun_copy other_vendor_target lun_copy_id=? target_lun_wwn=?





lun_copy_id=? ID of a LUN copy.

To obtain the value, run "show lun_copy general".

target_lun_wwn=? World Wide Name (WWN) of a remote LUN.

To obtain the value, run "show remote_lun general".



Usage Guidelines

  • Targget LUNs can not be removed from a LUN Copy which is in the state of copying or pause.
  • A LUUN Copy must have one target LUN at least.
  • Runnning this command permanently removes the copy relationship between the selected source and target LUNs.
  • Befoore running this command, ensure that the selected target LUN is exactly the one you want to remove from the selected LUN copy.
  • If aa LUN copy task disrupts due to a failed target LUN, removing the target LUN resumes the LUN copy task.


To remove the target LUN whose WWN is "60:02:2a:11:00:0b:81:68:00:02:93:94:00:00:00:11" from remote replication "0".

admin:/>remove lun_copy other_vender_target lun_copy_id=0 target_lun_wwn=60:02:2a:11:00:0b:81:68:00:02:93:94:00:00:00:11
DANGER: You are about to remove target LUN from LUN copy. This operation will remove the LUN copy relationship between source LUN and target LUN. This operation cannot be undone.
Before performing this operation, ensure that the selected LUN copy and target LUN are correct.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365356

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next