No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snmp usm

show snmp usm

Function

The show snmp usm command is used to query the configuration of USM user.

Format

show snmp usm [ user_name=? ]

Parameters

Parameter

Description

Value

user_name=? USM user name. If this parameter is specified, USM information on the specified user is queried.

To obtain the value, run "show snmp usm" without parameters.

Level

Guest

Usage Guidelines

  • To query all configuration of USM user, run "show snmp usm".
  • To query the configuration of specific USM user, run "show snmp usm user_name=?".

Example

To query all configuration of USM user, run the following command.

admin:/>show snmp usm
User Name Is Default Authenticate Protocol Private Protocol User Level
--------- ---------- --------------------- ---------------- ----------- 
Kaimse    Yes        SHA                   AES              Read Only
User      No         MD5                   AES              Read Write
User2     No         MD5                   3DES             Read Write

System Response

The following table describes the parameter meanings.

Parameter

Meaning

User Name

USM user name.

Is Default

Default.

Authenticate Protocol

Authentication protocol.

Private Protocol

Data encryption protocol.

User Level

USM user level.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 319739

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next