No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete kmc general

delete kmc general


The delete kmc general command is used to delete the configuration information for the security management server.


delete kmc general id=?





id=? ID of the key management center configuration information which will be deleted.

The value ranges from 1 to 2.


Super administrator

Usage Guidelines

This command is used to delete the configuration information for the key management center. User can view the existing kmc configuration information by "show kmc general" command and decide which kmc to be deleted according to its ID.


To delete the the configuration information for the key management center.

admin:/>delete kmc general id=1
DANGER: You are about to delete the configuration information for the key management center. This may cause the encrypted hard disk in use fail to pass the re-authentication process if the configuration information is invalid. And the application service to these disks will be interrupted if the re-authentication process fail after system re-boot.
Suggestion: Before running the command, please confirm if you would need import the new configuration information after you delete the old configuration information. Please also check whether the application service is interrupted.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 317330

Downloads: 210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next