No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system secure_compliance_clock

show system secure_compliance_clock

Function

The show system secure_compliance_clock command is used to check the secure compliance clock of a system.

Format

show system secure_compliance_clock

Parameters

None

Level

Guest

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.

Example

To check the date and time of the secure compliance clock of a system, run the following command:

admin:/>show system secure_compliance_clock 
Secure Compliance Clock:2014-10-15/10:10:10 UTC+08:00

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Secure Compliance Clock

Secure Compliance Clock.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 262259

Downloads: 178

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next