No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete security_rule

delete security_rule


The delete security_rule command is used to delete security rules.


delete security_rule rule_id=?





rule_id=? ID of a security rule.

To obtain the value, run "show security_rule". The value is an integer from 1 to 32.


Super administrator

Usage Guidelines

Deleted security rules cannot be restored.


Delete security rule "31".

admin:/>delete security_rule rule_id=31
WARNING: You are about to delete an IP address white list. This operation will make the IP addresses in this IP address white list unable to access the storage system when the IP address security rule is enabled.
Suggestion: Confirm that you need to delete this IP address white list.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 364404

Downloads: 238

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next