No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove port_group port

remove port_group port


remove port_group port command is used to remove a specified port from a port group.


remove port_group port port_group_id=? port_type=? port_id_list=?





port_group_id=? ID of a port group from which you want to remove a port.

To obtain the value, run "show port_group general".

port_type=? Type of a port that you want to remove.

The value can be "FC", "ETH", "FCoE", or "IB", where:

  • "FC": indicates Fibre Channel ports.
  • "ETH": indicates ETH ports.
  • "FCoE": indicates FCoE ports.
  • "IB": indicates IB ports.
port_id_list=? ID of a port that you want to remove.
  • To obtain the value, run "show port general".
  • When multiple ports need to be removed, separate these port IDs with commas (,).



Usage Guidelines

After a port is removed from a port group, it is no longer in the port group and can not be managed by the port group.


Remove port "ENG0.A4.P0" whose type is "ETH" from port group "0". The command output varies depending on a specific product.

admin:/>remove port_group port port_group_id=0 port_type=ETH port_id_list=ENG0.A4.P0
WARNING: You are about to remove the port from its owning port group. This operation will interrupt the services on the port.
Suggestion: Before performing this operation, ensure that the selected port and port group are correct, and stop services on the port.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Remove port ENG0.A4.P0 successfully

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 363118

Downloads: 235

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next