No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change domain nis_config

change domain nis_config

Function

The change domain nis_config command is used to modify NIS domain authentication configurations.

Format

change domain nis_config domain_name=? server_ip_list=?

Parameters

Parameter

Description

Value

domain_name=? Domain String using letters, digits and '-'(hyphen) in one section and '.'(dot) between different sections. Section length is from 1 to 63 and total string length is from 1 to 63 and the first and last character can not be '-'. For example: domain.com, domain.net.

The value consists of 1 to 63 characters.

server_ip_list=? IP address of the NIS server. A maximum of three IP addresses can be specified, and they must be separated from each other using commas (,).

A maximum of three IP addresses can be specified, and they must be separated from each other using commas (,).

Level

Administrator

Usage Guidelines

This command does not support OceanStor 2200 V3 storage system.

Example

  • To query NIS domain authentication configurations before the modification, run the following command.

    admin:/>show domain nis
      Name            :
      IP Address List :
  • To modify NIS domain authentication configurations, run the following command.

    admin:/>change domain nis_config domain_name=nisdomain server_ip_list=10.40.25.10,10.40.25.11,10.40.25.12
    WARNING:You are about to run the command for configuring the NIS domain. The NIS domain does not support encrypted transmission, which may cause security risks.
    Suggestion: Before performing this operation, ensure that the risk is acceptable.  
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • To query NIS domain authentication configurations after the modification, run the following command.

    admin:/>show domain nis
      Name            : nisdomain 
      IP Address List : 10.40.25.10 10.40.25.11 10.40.25.12

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Name

Indicates the name of the NIS domain.

IP Address List

Indicates the IP address list of the NIS server process.

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 235726

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next