No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reboot system

reboot system

Function

The reboot system command is used to restart the storage system. Running this command causes service interruption.

Format

reboot system [ force=? ]

Parameters

Parameter

Description

Value

force=? Forcible check tag(This parameter exists in the developer view only).

The value is "no" or "yes", where:

  • "no": indicates that forcible reset will not be performed.
  • "yes": indicates that forcible reset will be performed.

Level

Super administrator

Usage Guidelines

  • Before running this command, stop all the ongoing services on the storage system.
  • This command provides an interactive mode for entering passwords. The password will be displayed behind asterisks.
  • If the number of consecutively entered incorrect passwords reaches 3 within 5 minutes, the current session will be disconnected.

Example

  • To restart the storage system, run the following command.

    admin:/>reboot system
    DANGER: You are about to restart storage system. This may take several minutes. This operation will interrupt all services on the storage system.
    Suggestion: Before performing this operation, stop all services on the system.
    Have you read danger alert message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Password:******
    Command executed successfully.
  • Reset the system forcibly.

    developer:/>reboot system force=yes
    DANGER: You are going to forcibly reset the system. This operation interrupts controller services and may cause configuration data loss. 
    Suggestion: Do not perform this operation when the controller is working.
    Have you read danger alert message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Password:******
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-22

Document ID: EDOC1000106139

Views: 239225

Downloads: 168

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next