No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 2200 V3 and 2600 V3 Storage System V300R005 Command Reference 06

"Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands."

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change clone synchronize

change clone synchronize


The change clone synchronize command is used to synchronize the primary logical unit number (LUN) with existing secondary LUNs for a clone task.


change clone synchronize clone_id=? lun_id=?





clone_id=? ID of a clone task that you want to synchronize the primary LUN with existing secondary LUNs.

To obtain the value, run "show clone general".

lun_id=? ID of a secondary LUN.

To obtain the value, run "show clone secondary_lun".



Usage Guidelines

For a clone task, running this task overwrites the data of a secondary LUN using that of the primary LUN.


To synchronize the data of the primary LUN with secondary LUN "9" for clone task "3", run the following command:

admin:/>change clone synchronize clone_id=3 lun_id=9
DANGER: You are about to synchronize secondary LUN of clone. This operation will cause primary LUN data to overwrite secondary LUN data.
Suggestion: Before performing this operation, ensure that the selected secondary LUNs are correct to avoid misoperation.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000106139

Views: 365947

Downloads: 240

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next